Page Banner Image

Agriculture Showroom

2026 Manitou Group MLA 7-75 H-Z 

Call or Click for Quote

(570) 966-1952

Apply for financing

Get in Touch

    Contact Us Form

    All fields marked with an asterisk (*) are required.

    First Name *

    Last Name *

    Email *

    Phone *

    Unit Name

    Unit Price

    Comments/Questions

    Description

    2026 Manitou Group MLA 7-75 H-Z

    The Manitou MLA 7-75 is the largest wheel loader in the range with a standard lift arm. Similar to the smaller units, this machine did not make compromises in terms of comfort and performance! The hydrostatic transmission is smooth at low speed and very powerful in demanding circumstances. With gearshift and 100% diff lock controls on the joystick, the operator is always in control. With optional 30 kph and lift arm suspension, the MLA 7-75 will bring you in full comfort from one jobsite to another. The Z-bar loader linkage gives you the extra break-out force, return to dig and parallel guidance. Whether in agricultural or in construction environment, this wheel loader performs at its best in tough conditions and never lets you down.


    Info

    Industry

    Agriculture

    Make

    Manitou Group

    Model

    MLA 7-75 H-Z

    Trim

    Base

    Year

    2026

    MSRP

    N/A

    Category

    Telehandler

    Subcategory

    General


    Specs

    Notes

    Static tipping load with bucket (straight): 6956 lb | Static tipping load with bucket (full turn): 5360 lb | Static tipping load with forks (straight): 5280 lb | Static tipping load with forks (full turn): 4057 lb | Breakout force with bucket: 5743 daN | Tilt-up angle: 45 ° | Tilt-down angle: 45 ° | Articulation angle: 45 ° | Crowd: 4.77 s | Dump: 2.84 s | Number of gears (forward / reverse): 2 / 2 | Max. travel speed (may vary according to applicable regulations): 25 mph | Travel speed (laden): 12 mph | Differential lock: Front and rear locking of the machine | Hydraulic pump type: Gear pump | Hydraulic flow - Pressure: 18 US gpm / 2901 PSI | Drive hydraulic system pressure: 6092 PSI | Vibration on hands/arms: < 8 ft/s² | Cab certification: ROPS - FOPS cab (level 1)

    Height

    Max. height of bucket pivot point: 10 ft 11 in | Max. lifting height (below forks): 10 ft 3 in | Reach at max. height: 2 ft 4 in | Overall height with FOPS removed and ROPS folded: 6 ft 6 in | Overall height with 4 posts canopy: 8 ft 1 in | Overall height with cab: 8 ft 1 in

    Weight

    Unladen weight (with forks) with 4-post canopy: 9753 lb | Unladen weight (with forks): 10141 lb

    Length

    Overall length to carriage (with hitch): 14 ft 2 in

    Wheelbase

    6 ft 7 in

    Width

    Overall width of 4 posts canopy: 4 ft 2 in | Overall cab width: 4 ft 2 in | Overall width less bucket: 5 ft 5 in

    Ground Clearance

    1 ft 3 in

    Engine

    Deutz | Stage V | Engine cooling system: 2 radiators water + hydraulic oil

    Cylinders

    4 - 177 in³

    Power/Horsepower

    75 Hp / 55.40 kW

    Torque

    276 ft/lbs / 1600 rpm

    Transmission

    Hydrostatic

    Brakes

    Parking brake: Manual | Service brake: Hydraulic drum brake on front axle, acting on all 4 wheels

    Oil Capacity

    Hydraulic oil: 20 US gal

    Fuel Capacity

    25 US gal